A Simple Protocol to Refold Peptides or Small Proteins

Understanding the process of peptide folding is a critical first step toward understanding protein folding. Depending on the temperature and solvent conditions, peptides are highly flexible and can adopt a variety of conformations in solution. Many unfolded peptides could spontaneously refold in vitro to form a native protein with full biological activity in the absence of other factors. Peptide fragments of proteins often have intrinsic propensities for the formation of their native conformations.

Peptide Folding

Proteins are the workhorses inside living cells. The interactions among proteins are critical for various important biological processes. Almost about 15-40% of the protein-protein interactions are peptide-mediated. A short stretch of amino acid residues from one protein partner contributes most to its binding to the other protein structure. These short linear interacting motifs can be found embedded inside disordered regions of intrinsically disordered proteins, or appear as flexible linkers connecting function regions and as flexible loops to rigid fragments and domains.

The primary sequence contains all the information to define the three-dimensional structure of a protein and its biological functions. The mutation or deletion of any amino acid may have a big impact on folding and stability. It takes nanoseconds (ns) for the peptide to form an intermolecular contact. The timescale of loop closing is 10 nanoseconds (ns). The formation of alpha-helical peptides is 200 ns,  beta hairpins, and mini-proteins in 1–10 ms timescale. Many studies had a very good agreement between measured and calculated folding rates. Many factors such as temperature, pH,  molecular chaperones, salts, and denaturants may affect a peptide in reaching its native state.

So it is critical to minimize factors that affect protein refolding. A successful folding should have inadequate denaturant concentrations to destabilize the native state of a peptide or protein. GuHCL can be used in order to disrupt the hydrophobic interactions within the tertiary structure.

  1. The peptide was solubilized in resuspension buffer (50 mM Tris, pH 8, 6 M GuHCl (Sigma, G4505), 10 mM DTT, 2mM EDTA) by vortexing.
  2. Use enough resuspension buffer such that the final peptide concentration is 0.2mg/ml.
  3. The resuspended peptide was then diluted 50% in dialysis buffer #1 (50 mM Tris, pH 8, 2 M GuHCl, 2mM EDTA) resulting in a 4 M GuHCl-containing solution.
  4. The peptide solution was then dialyzed overnight at 4°C in snakeskin dialysis tubing (Pierce) against 2 L of buffer #1.
  5. The following day the dialysis buffer was changed to 2 L of dialysis buffer #2 (50 mM Tris, pH 8, 1 M GuHCl, 0.4 M Arginine (Sigma, A5006), 3 mM Reduced Glutathione, 0.9 mM Oxidized Glutathione, 2mM EDTA) for overnight dialysis at 4°C.
  6. The following day the dialysis buffer was diluted 50% with water and dialysis continued overnight.
  7. Any insoluble material was centrifuged (18000×g at 2–8°C for 20 minutes) and the remaining peptide solution dialyzed overnight at 4°C against 1 L of dialysis buffer #3 (50 mM Tris, pH 8, 250 mM NaCl, 0.1 M Arginine, 3 mM Reduced Glutathione, 0.9 mM Oxidized Glutathione, 2mM EDTA) to remove the remaining GuHCl.
  8. The final dialyzed protein solution was clarified by centrifugation (18000×g at 2–8°C for 20 minutes) and the supernatant was separated by RP-HPLC.

References:

Protein Refolding for Western Blotting

For refolding, proteins in the SDS-Polyacrylamide gels were incubated in transfer buffer I (0.01% Triton X-100, 48 mM Tris, 39 mM Glycine, 20%methanol, pH 9.2) twice for 15 min, and then transfer buffer II (48 mM Tris, 39 mM Glycine, 20%methanol, pH9.2) twice for 15 min, then transferred onto Immobilon-P membranes (Millipore) in transfer buffer II and processed by standard procedures for Western blots.

Reference: Zhou J, Blissard GW. Mapping the conformational epitope of a neutralizing antibody (AcV1) directed against the AcMNPV GP64 protein. Virology. 2006 Sep 1;352(2):427-37. doi: 10.1016/j.virol.2006.04.041. Epub 2006 Jun 14. PMID: 16777166; PMCID: PMC3767133.

Peptide Synthesis Home Page

Our Services:

COVID-19 Services & Products

Custom Antibody Services

Rush Peptide Synthesis

Peptide Nucleic Acids (PNAs)

Custom Peptide Synthesis Services

Gene Synthesis Service

Custom Chemical Synthesis

Other Posts: To Make Simpler and Better Biosensors LifeTein Peptides Used for Pulldown Assay Peptide Applications

LifeTein Peptides Used for Pulldown Assay

LifeTein synthesized multiple peptides for the pulldown experiments. The peptides were synthesized with biotin on the N terminus and an aminohexanoic acid linker. Two types of peptides were designed: peptide without acetylation and peptide with multiple lysines (up to five sites) were acetylated in the synthetic peptides.

Pulldown Experiments With LiteTein Peptides

These peptides were bound to streptavidin-agarose beads and used for pulldown experiments using cell lysates.  Peptides, streptavidin agarose beads, and cell lysates were permitted to bind for overnight at 4 °C,  then beads were pelleted, washed five times using spin columns, and proteins were eluted in sample buffer and analyzed by SDS-PAGE and immunoblotting. All synthetic peptides had an N-terminal biotin. After incubation, peptides were spotted on nitrocellulose membranes and immunoblotted to detect acetylated Lysine (AcK) or total biotinylated peptide. Data is shown below.
Acetylated lysine peptide

Dot blot for biotin peptide with pulldown assay

Reference: Acetylation of TUG Protein Promotes the Accumulation of GLUT4 Glucose Transporters in an Insulin-Responsive Intracellular Compartment, The Journal of Biological Chemistry, January 5, 2015, doi: 10.1074/jbc.M114.603977 jbc.M114.603977.

Peptide Synthesis Home Page

Our Services: COVID-19 Services & Products Custom Antibody Services Rush Peptide Synthesis Peptide Nucleic Acids (PNAs) Custom Peptide Synthesis Services Gene Synthesis Service Custom Chemical Synthesis Other Posts: Amino acid composition of cell-penetrating peptides (CPPs) To Make Simpler and Better Biosensors A Simple Protocol to Refold Peptides or Small Proteins Peptide Applications

Synthetic Peptides Used for indirect ELISA

ELISA

Peptides can be used for ELISA assay. A peptide-based indirect ELISA was used to screen a population of 40 Multiple sclerosis patients and 39 healthy controls. The encephalitogenic myelin oligodendrocyte glycoprotein (MOG)35–55 synthetic peptides were synthesized by LifeTein.

LifeTein’s Synthetic Peptides for ELISA

All MOG peptides or Mycobacterium avium subspecies paratuberculosis (MAP) peptides were synthesized at >90% purity by LifeTein to make sure the ELISA results are clean and consistent. The plates were coated with peptides. After overnight incubation, the plate was blocked, rinsed, and late react with antibodies according to the protocol. In silico analysis identified two peptides belonging to MAP and BCG, which share sequence homology with MOG(35–55). The peptide-based indirect ELISA data showed that sharing of highly conserved linear amino acidic sequences is necessary to elicit antibody-mediated cross-reactivity.

These findings concluded that the presence of MOG (35–55)-specific antibodies in multiple sclerosis pathogenesis. This can be used as a diagnostic biomarker in multiple sclerosis.

 [PDF] Evaluation of the humoral response against mycobacterial peptides, homologous to MOG35–55, in multiple sclerosis patients

MG Marrosu, LA Sechi – 2014

 All peptides were synthesized at N90% purity commercially (LifeTein, South
Plainfield, NJ 07080 US). Purified peptides were prepared as [10 mM] stock solutions,
and were stored in single- use aliquots at −80 °C. 2.3. ELISA 

Peptide Synthesis Home Page

Our Services:

COVID-19 Services & Products

Custom Antibody Services

Rush Peptide Synthesis

Peptide Nucleic Acids (PNAs)

Custom Peptide Synthesis Services

Gene Synthesis Service

Custom Chemical Synthesis

Other Posts:

LifeTein Peptide Cited in Cell

Phospho-specific antibodies by LifeTein published in Nature

Synthesis of multiple antigenic peptides: strategies and limitations

The Structural Basis of Peptide-Protein Binding Strategies

 

LifeTein Peptide Cited in Cell

Peptide library is increasingly used to define antibody epitopes and substrate specificities of protein kinases. For epitope mapping, overlapping peptides are made to span the antigenic protein sequence. The antigenic determinant recognized by a monoclonal antibody can then be screened and defined. The alanine scanning method can also be used to assess that residue’s contribution to antibody binding and to determine which substitutions affect antibody recognition (mutational analysis). Unrelated synthetic peptides can be used to evaluate the antibody cross-reactivity.

Peptide by LifeTein Cited in Cell

Overlapping peptides from LifeTein were used to map the region of Fragment 3 by epitope mapping of anti-Fzd2 antibody. This anti-Fzd2 antibody was found to reduce tumor growth. Wnt signaling plays a critical role in colorectal cancer. Researchers found that Wnt receptor Frizzled2 (Fzd2) and its ligands Wnt5a/b are elevated in metastatic liver, lung, colon, and breast cancer cell lines. Their high level expression correlates with markers of epithelial-mesenchymal transition (EMT). By epitope mapping using synthetic peptides from LifeTein, the researchers mapped the epitope to a specific region. The antibody to Fzd2 was found to reduce cell migration and invasion. Targeting this pathway may provide a cure for patients with tumors expressing high amount of Fzd2 and Wnt5a/b. We have developed an antibody to Fzd2 that reduces cell migration and invasion and inhibits tumor growth and metastasis in xenografts. We propose that targeting this pathway could provide benefit for patients with tumors expressing high levels of Fzd2 and Wnt5a/b.

Peptide Synthesis Home Page

Our Services: COVID-19 Services & Products Custom Antibody Services Rush Peptide Synthesis Peptide Nucleic Acids (PNAs) Custom Peptide Synthesis Services Gene Synthesis Service Custom Chemical Synthesis Other Posts: Phospho-specific antibodies by LifeTein published in Nature Synthesis of multiple antigenic peptides: strategies and limitations The Structural Basis of Peptide-Protein Binding Strategies Synthetic Peptides Used for indirect ELISA

Phospho-specific antibodies by LifeTein published in Nature

Jia Shen. et al. EGFR modulates microRNA maturation in response to hypoxia through phosphorylation of AGO2. Nature 497, 383–387 (16 May 2013), doi:10.1038/nature12080 LifeTein helped designed and synthesized a series of phosphorylated s. Then the peptides were used for phospho-specific productions. The phospo-specific antibodies by LifeTein were confirmed to react with the epidermal growth factor receptor (EGFR). The Hung’s lab showed that AGO2-Y393 phosphorylation mediates EGFR-enhanced cell survival and invasiveness under hypoxia. These findings suggest that modulation of miRNA biogenesis is important for stress response in tumour cells. … The following peptides were chemically synthesized for in mice (Lifetein Conc.), Elisa verification (LifeteinConc.) and peptide competition assay in immunohistochemistry (IHC)… Supplementary information

Phospho-Specific Antibodies by LifeTein

Peptide Synthesis Home Page

Our Services:

COVID-19 Services & Products

Custom Antibody Services

Rush Peptide Synthesis

Peptide Nucleic Acids (PNAs)

Custom Peptide Synthesis Services

Gene Synthesis Service

Custom Chemical Synthesis

Other Posts:

LifeTein Peptide Cited in Cell

Synthesis of multiple antigenic peptides: strategies and limitations

The Structural Basis of Peptide-Protein Binding Strategies

Synthetic Peptides Used for indirect ELISA

 

Synthesis of multiple antigenic peptides: strategies and limitations

Synthesis of multiple antigenic peptides: strategies and limitations Dendrimeric platforms such as multiple antigenic peptides (MAP) can be synthesized either entirely by solid-phase methods (SPPS, direct approach) or by conjugation in SPPS-made building blocks (indirect approach).

Synthesis of Multiple Antigenic Peptides

MAP peptide synthesis

MAP peptide synthesis

http://www.ncbi.nlm.nih.gov/pubmed/21391284 SPPS is the preferred method by LifeTein. The synthesis approach requires a branched poly-lysine core. Each branch is elongated into the corresponding epitope by stepwise SPPS. The disadvantage of this approach is that the synthetic errors could happened and cause microheterogeneity in the final materials. However the cost is lower and less time-consuming than the indirect approach. For very long linear peptides, it is more advantageous to use the SPPS method. The MAP synthesis may not always meet with success. The solubility of the peptide epitope can also become an issue and is difficult to predict for long epitopes. It is recommended to carefully design and analyze the linear epitope before MAP synthesis. Studies showed that synthesis with Ahx linker in the lysine core had better isolated yield. It is possible that the flexibilizing effect of Ahx helps in keeping peptide chains properly solvated during synthesis, preventing aggregation and hence increasing the amount of viable growing peptide sequences.

Peptide Synthesis Home Page

Our Services: COVID-19 Services & Products Custom Antibody Services Rush Peptide Synthesis Peptide Nucleic Acids (PNAs) Custom Peptide Synthesis Services Gene Synthesis Service Custom Chemical Synthesis Other Posts: LifeTein Peptide Cited in Cell The Structural Basis of Peptide-Protein Binding Strategies Synthetic Peptides Used for indirect ELISA Phospho-specific antibodies by LifeTein published in Nature

The Structural Basis of Peptide-Protein Binding Strategies

peptide protein binding strategy

Peptide protein binding strategies: Structure, Volume 18, Issue 2, 188-199, 10 February 2010

Peptide-Protein Binding

Highlights

  • After binding its partners, most peptides do not introduce any conformational changes
  • The interfaces of peptide-protein have more hydrogen bonds
  • The peptide hotspots are important for the binding
  • Peptides prefer to bind in the largest pockets on the protein surface

LifeTein is pleased to offer a free, comprehensive web-based peptide analysis tool. This tool will allow your research team to overcome common difficulties inherent in protein analysis and peptide antigen design.

 
 

Peptide Synthesis Home Page

Our Services:

COVID-19 Services & Products

Custom Antibody Services

Rush Peptide Synthesis

Peptide Nucleic Acids (PNAs)

Custom Peptide Synthesis Services

Gene Synthesis Service

Custom Chemical Synthesis

Other Posts:

LifeTein Peptide Cited in Cell Phospho-specific antibodies by LifeTein published in Nature Synthesis of multiple antigenic peptides: strategies and limitations Synthetic Peptides Used for indirect ELISA

D-amino acid peptides to resist common proteases

Proteins and most naturally occurring peptides are composed of amino acids in the L-configuration. However, D-amino acids have been detected in a variety of peptides synthesized in animal cells. Examples include opiate and antimicrobial peptides from frog skin, neuropeptides from snails, hormones from crustaceans, and venom from spiders. These D amino acid peptides are considered to be the most promising alternative for anticancer, anti-inflammatory, antimicrobial, and delivery agents.

About D-Amino Acid Peptides

The design of all-D-peptides has been applied to increase bioactive peptides’ resistance to endogenous enzymes, as well as their bioavailability. Retro-inverso peptides are obtained by replacing the standard L-amino acid residues with the corresponding D-amino acids and reversing the direction of the peptide backbone. Therefore, the original spatial orientation and the chirality of the side chains is unchanged. This results in a non-complementary side chain topochemistry between the analog and the parental L-peptide. The significantly improved biostability of D-peptides usually leads to longer in vivo circulation half-time, making the D-peptide based drug delivery system more attractive and efficient than their L-peptide counterparts. Success has been achieved immunologically in using retro-inverso peptides toward antigenic mimicry of their parent l-peptides. It was found that the retro-all-d-peptide isomer of p53(15–29), like its parent l-peptide, adopted a right-handed helical conformation in the complex. However, in some cases, the retro-inverso isomers are significantly inferior to their parent l-peptides. The low cellular uptake of D-peptides remain an unmet challenge. So the best way is to insert some key D amino acids into the peptide sequence. For example, some pharmaceutical important peptide antibiotics such as gramicidins, actinomycins, or bacitracins incorporate D-amino acids into the drug design. The assemblies of D-peptides deserve further exploration and may lead to more surprises.
D amino acid peptide with high stability

D amino acid peptide with high stability

See more details from here: http://lifetein.com/Peptide-Synthesis-D-Amino-Acid.html Reference: http://www.pnas.org/content/102/2/413.full.pdf+html Google+

Peptide Synthesis Home Page

Our Services: COVID-19 Services & Products Custom Antibody Services Rush Peptide Synthesis Peptide Nucleic Acids (PNAs) Custom Peptide Synthesis Services Gene Synthesis Service Custom Chemical Synthesis Other Posts: Amino acid composition of cell-penetrating peptides (CPPs) Obesity Treatment: A New Peptide Drug Peptide Synthesis for Cell-penetration Studies

Synthetic Peptide Vaccine Research: Problems and Accomplishments

Amino acid composition of cell-penetrating peptides (CPPs)

Cell-penetrating peptides (CPPs) such as the HIV TAT peptides are able to enter cells by direct translocation and endocytosis. Click here to see details about the CPP: http://lifetein.com/Cell_Penetrating_Peptides.html

About Cell-Penetrating Peptides

cell penetrating peptide entry mechanism

Cell Penetrating Peptides

The following table shows a selection of currently known CPPs, their origins, and sequences.
Name

Origin

Sequence

Tat (48-60)

HIV-1 protein

GRKKRRQRRRPPQQ

     plsl

Igl-1 homeodomain

RVIRVWFQNKRCKDKK

STR-R8

Stearly-RRRRRRRR-amide (Stearyl = CH3(CH2)16CO-)

STR-(RxR)4

Stearly-(RxR)4-amide (X=6-aminohexanoic acid)

Obesity Treatment: A New Peptide Drug

Targeted Drug Melts Fat in Obese Monkeys Currently, only two Food and Drug Administration (FDA) approved drugs for weight loss are available in the United States: the appetite suppressant phentermine and the inhibitor of fat absorption orlistat.

Peptide Drug for Obesity

An MD Anderson group designed a new peptide drug: CKGGRAKDC-GG-D(KLAKLAK)2 (adipotide). This is a synthetic peptide that triggers cell death. These data showed that the peptide might be helpful in treating obesity in humans. The MD Anderson group used a peptide library to screen and identify regions that bind to specific vascular cells. The interaction identified will be used as effective drugs to target particular protein functions. This video explains factors that have contributed to the obesity epidemic.

Peptide Synthesis Home Page

Our Services: COVID-19 Services & Products Custom Antibody Services Rush Peptide Synthesis Peptide Nucleic Acids (PNAs) Custom Peptide Synthesis Services Gene Synthesis Service Custom Chemical Synthesis Other Posts: Peptide Synthesis for Cell-penetration Studies Synthetic Peptide Vaccine Research: Problems and Accomplishments D-amino acid peptides to resist common proteases Amino acid composition of cell-penetrating peptides (CPPs)